Filter
Top Products
6-2
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Tru64 UNIX Installation Checklist
Tru64 UNIX Configurations
Read this section if you are installing a Tru64 UNIX configuration
with a new server and a new storage system. A new server and
storage system are defined as follows:
New server - A server running Tru64 UNIX and not connected to any
storage system.
New storage system - A CX500 or CX700 storage system that has the
factory default settings and has never been connected to a server.
Prerequisites
◆ All switches must be installed.
◆ Storage systems must be set up, initialized (if required), and
connected to switches, and any optional storage-system software
(Access Logix, SAN Copy, SnapView, MirrorView,
MirrorView/A) must be installed.
◆ If you will use Navisphere Manager 6.X, you must have a host
that is
• Running an operating system that can support the Navisphere
Manager 6.X browser-based client. For an up-to-date list of
such operating systems, refer to the Navisphere Manager 6.X
release notes on http://powerlink.emc.com.
• On a network that is connected to the storage-system servers
and that will be connected to the SPs in CX500 or CX700
storage systems.