Filter
Top Products
PowerPath Configurations for Windows
7-5
Windows Installation Checklists
Documentation
Each checklist refers to some or all of the documents listed below. We
recommend that you load these documents on your service laptop.
◆ Documentation that ships with the HBA or NIC and HBA or NIC
driver.
The HBA documentation is also available from the following websites.
For Emulex HBAs and drivers:
http://www.emulex.com/ts/docoem/framemc.htm
For QLogic HBAs and drivers:
http://www.qlogic.com/support/drivers_software.asp
and select EMC in the OEM-approved Drivers/Firmware list at the
bottom of the page.
◆ Documentation that ships with the
• Fibre Channel switches and switch management software
• Microsoft Windows operating system
◆ Removing ATF or CDE Software Before Installing Other Failover
Software (P/N 069001173)
◆ PowerPath Version 4.3 Product Guide (P/N 300-001-673)
or
PowerPath Version 3.0 Product Guide (P/N 300-000-047)
◆ PowerPath for Windows Version 4.3 Installation and Administration
Guide (P/N 300-001-685)
or
PowerPath Version 3.0 Installation and Administration Guide for
Windows (P/N 300-001-045)
◆ EMC Navisphere Host Agent and CLI for Windows 2000 and NT
Version 6.X Installation Guide (P/N 069001151)
or
EMC CX-Series Server Software for Windows Installation Guide
(P/N300-002-038)
◆ EMC Navisphere Command Line Interface (CLI) Reference
(P/N 069001038)
◆ EMC SnapView Version 2.X Installation Guide (P/N 069001193,
revision A02 or higher)
◆ EMC SAN Copy Version 2.X Installation Guide (P/N 069001187)