Filter
Top Products
PowerPath Checklist — New AIX Server and Existing Storage System
1-15
AIX Installation Checklists
8Storage System
Set properties for
PowerPath
❑
Use Navisphere Manager’s
Failover Setup Wizard (selected
from the Tools menu on the
toolbar) to set the initiator type,
failover mode, and array
commpath properties for the
server’s HBA ports (initiators):
Initiator Type to CLARiiON Open
Failover mode to 1
Array commpath to Enabled
Note: Setting the array
commpath property to 1
(enabled) creates LUNZ devices.
❑
Use Navisphere Manager’s
Failover Setup Wizard (selected
from the Tools menu on the
toolbar) to set the initiator type,
failover mode, and array
commpath properties for the
server’s HBA ports (initiators):
navicli -h
hostname
systemtype
-config 3
navicli -h
hostname
failovermode 1
navicli -h
hostname
arraycommpath 1
where
hostname
is the IP
address or network name of an
SP in the storage system.
Note: Setting the array
commpath property to 1
(enabled) creates LUNZ devices.
Navisphere Manager
administrator’s guide
and online help
or
Navisphere CLI
reference
Task
With Access Logix Without Access Logix Reference Document