5-12
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Solaris Installation Checklists
16 Server
Make LUNs
available to
Solaris
❑
Prepare the LUNs to receive data by
• Specifying Solaris mount point names for them
• Labeling and partitioning them
• Mounting file systems on them
• Mounting them to the mount points
Solaris host
connectivity guide or
Solaris documentation
17 Server
Configure
PowerPath for
missing devices
❑
Use the following PowerPath commands to configure PowerPath for any
missing logical devices so all paths to LUNs are visible:
powercf -i or powercf -q
powermt config
PowerPath product
guide
❑
Checkpoint - Use the following PowerPath command to verify that
PowerPath sees all the paths to the LUNs:
powermt display dev=all class=clariion
If PowerPath cannot see all the paths, verify that
• You registered your PowerPath license key if you have one.
• the storage-system properties are set as defined in step 11.
18 Server
Test PowerPath
with a license
key
If you have a PowerPath license key
Note If your PowerPath license key is not registered, the load balancing policy
is restricted to basic failover.
❑
Stop all applications accessing the storage system and disable user logins
to the server.
❑
View the LUNs available to the server using the following PowerPath
command:
powermt display dev=all class=clariion
PowerPath product
guide
❑
Choose one available LUN to receive I/O for the test.
❑
View the paths to the chosen LUN using the PowerPath following
command:
powermt display dev=
x
every=2
where
x
is a pseudo device that represents the chosen LUN.
Task
With Access Logix Reference Document