Filter
Top Products
3-48
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
◆ You must have planned your LUNs and RAID Groups, and
Storage Groups if you have Access Logix. Be sure to consider
requirements for SAN Copy, SnapView, and MirrorView if you
have this software. The EMC CLARiiON CX300, CX500, CX500i,
and CX700 Storage Systems Configuration Planning Guide (P/N
300-001-273) will help you with this planning.
Documentation
This checklist refers to some or all of the documents listed below. We
recommend that you load these documents on your service laptop
before starting the installation.
◆ Documentation that ships with
• HBA and HBA driver
This documentation is also available from the following websites:
For Emulex HBAs and drivers:
http://www.emulex.com/ts/docoem/framemc.htm
For Qlogic HBAs and drivers:
http://www.qlogic.com/support/home_support.asp
and select EMC in the OEM selection box at the bottom of the page.
• Switches and switch management software
• Red Hat Linux operating system
◆ EMC Navisphere Manager Administrator’s Guide (P/N 069001125)
◆ EMC Navisphere Security Administrator’s Guide (P/N 069001124)
◆ EMC Host Connectivity Guide for Linux (P/N 300-000-604)