Filter
Top Products
7-42
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Windows Installation Checklists
17 Storage System
Configure
❑
Use Navisphere Manager to set general storage-system properties. Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to create RAID Groups, bind LUNs, create
Storage Groups, and assign LUNs to Storage Groups.
❑
Use Navisphere Manager to connect the server to a Storage Group
❑
Reboot the server so Windows recognizes the LUNs.
Now the LUNs in the Storage Group look like any other disks in the server.
Windows documentation
❑
Checkpoint - Use one of the following ways to verify that PowerPath sees
all the paths to the LUNs:
• PowerPath Administrator (Start > Programs
>
EMC
>
PowerPath
Administrator)
• PowerPath command
powermt display dev=all class=clariion
If PowerPath does not see the LUNs
• Verify the server’s connection to the Storage Group.
• Verify that you registered your PowerPath license key if you have one.
• Verify that the storage-system properties are as defined in step 14.
PowerPath product
guide
18 Storage System
Configure Event
Monitor
❑
If you will monitor storage-system events, use Navisphere Manger to apply
the desired event monitor templates to the storage system.
For a CX300, CX500, or CX700 storage system, go to step 21.
For a CX500i storage system, continue to step 19.
Navisphere Manager
administrator’s guide
and online help.
19 CX500i Storage
System
Configure
optional CHAP
security
❑
Use Navisphere Manager to configure CHAP on the storage system, but
do
not
enable yet.
Storage-system setup
guide and Manager
online help
Task
With Access Logix Reference Document