2-56
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
HP-UX Installation Checklist
5 Server
Install Host
Agent
❑
Install the Navisphere Host Agent. CX-Series Server
Software for HP-UX
Installation Guide
❑
Modify user login scripts.
❑
Edit the Navisphere Host Agent configuration file agent.config file as
follows:
• Add the following entry if it does not already exist:
device auto auto
• Add at least one privileged user.
• For FC4500 storage systems, if you know the IP addresses of the portal
storage-system SPs, add an entry with the following format for each SP
to the agent.config file:
system@
SP_ip_address
where
SP_ip_address
is the address of the SP.
❑
Continue to edit the Navisphere Host Agent configuration file agent.config
file as follows:
• Comment out or comment the OptionsSupported Autotrespass entry
as follows:
No auto trespass
(for HP-UX without PV Links)
# OptionsSupported Autotrespass
The above entry will set the initiator type for the HBAs to no auto
trespass when Host Agent is restarted later in this procedure.
Auto trespass
(for HP-UX with PVLinks)
OptionsSupported Autotrespass
The above entry will set the initiator type for the HBAs to auto trespass
when Host Agent is restarted later in this procedure.
• Edit any other entries as desired.
6 Storage System
Set up security
❑
For Navisphere 6.X, use Navisphere Manager to define a global
administrator and domain (if not already defined) and any additional users.
Navisphere security
administrator’s guide
and Navisphere
Manager online help
Task
With Access Logix Reference Document