PowerPath Configurations for NetWare
4-3
NetWare Installation Checklists
Required Host
Software Revisions
◆ NetWare operating system revision and kernel listed in the EMC
Support Matrix on the Powerlink website
(http://powerlink.emc.com)
◆ HBA driver revision listed in the EMC Support Matrix on the
Powerlink website (http://powerlink.emc.com)
◆ NetWare PowerPath
• For CX200, CX400, CX600, or FC4700-Series storage systems
Version 3.0.0 with patch 3.0.1 or higher
• For CX300, CX500, CX700 storage systems
Version 3.0.1 or higher
• For FC4500 storage systems
Version 3.0.0 with patch 3.0.2 or higher
Refer to the EMC Support Matrix and the EMC PowerPath Release Notes for
UNIX on the Powerlink website (http://powerlink.emc.com) for the
specific revision required for your NetWare version.
Prerequisites
◆ You must have a host that is
• Running an operating system that can support the Navisphere
Manager 6.X browser-based client. For an up-to-date list of
such operating systems, refer to the Navisphere Manager 6.X
release notes on http://powerlink.emc.com.
• On a network that is connected to the storage-system server
and that you will connect to the SPs in a CX200, CX300, CX400,
CX500, CX600, CX700, or FC4700-Series storage system.
◆ For most configurations, you must also have a host that is
• Running Navisphere CLI version 6.X
• On a network that is connected to the storage-system server
and that you will connect to SPs in CX200, CX300, CX400,
CX500, CX600, CX700, or FC4700-Series storage system.
◆ For an FC4500 storage system connected to a server on which you
will install PowerPath, you must have a computer that you can
connect to the storage system. This computer must run
• Windows 2000
• Navisphere Host Agent and CLI version 6.1 or higher