Filter
Top Products
3-18
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
11 Server
Make target SPs
available
❑
Add persistent bindings to the
HBA driver configuration file.
Note: You need the WWPN of
each SP port for the bindings.
❑
Add persistent bindings to the
HBA driver configuration file.
Note: You need the WWPN of
each SP port for the bindings.
HBA documentation
(see URL on page 3-4)
❑
Reboot the server.
❑
Reboot the server. Linux documentation
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each HBA
is registered with the storage
system.
Navisphere Manager
administrator’s guide
and online help
❑
Checkpoint - Make sure the
/proc/scsi/scsi file has entries
for LUNZs.
Note: LUNZs are required to
register the server HBAs with the
storage system because LUNs
have not be configured yet.
❑
Checkpoint - Make sure the
/proc/scsi/scsi file has entries
for LUNZs.
Note: LUNZs are required to
register the server HBAs with the
storage system because LUNs
have not be configured yet.
Linux documentation
❑
Checkpoint - Make sure the file
for the HBA directory in the
/proc/scsi directory has entries
for the expected targets (HBAs).
❑
Checkpoint - Make sure the file
for the HBA directory in the
/proc/scsi directory has entries
for the expected targets (HBAs).
Task
With Access Logix Without Access Logix Reference Document