Filter
Top Products
PowerPath Checklist — New Windows Server and Existing Storage System Without Boot Disk
7-17
Windows Installation Checklists
9Server
Cable to Fibre
Channel
switches,
network, or
storage-system
data ports (cont.)
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which
indicates that a 1-Gbit SP port
is logged in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which
indicates that a 1-Gbit SP port
is logged in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
Switch documentation
For a CX500i storage system
❑
Cable the HBA or NICs ports to
the network connected to the
storage-system iSCSI data ports
or directly to the storage-system
iSCSI data ports.
Storage-system setup
guide
❑
Checkpoint - For a network
connection with the server, verify
the storage-system connections
to the network router or switch by
checking the LED(s) for the router
or switch port connected to each
SP port.
Switch documentation
10 Server With a
CX500i Storage
System
Configure server
iSCSI initiator
ports
For NICs
❑
Use Microsoft iSCSI Software
Initiator on the server to configure
the iSCSI initiators for each NIC
port.
N/A Storage-system setup
guide
For iSCSI HBAs
❑
Use QLogic SANsurfer to
configure the iSCSI initiators for
each HBA port.
Task
With Access Logix Without Access Logix Reference Document