Filter
Top Products
PowerPath Configurations for HP-UX
2-3
HP-UX Installation Checklist
Required Host
Software Revisions
◆ HP-UX operating system revision listed in the EMC Support
Matrix on the Powerlink website (http://powerlink.emc.com)
◆ HBA driver revision listed in the EMC Support Matrix on the
Powerlink website (http://powerlink.emc.com)
◆ HP-UX PowerPath
•For
CX300, CX400, CX600, C4500, and FC4700-Series storage
systems
Version 3.0.2 or higher
• For CX500 and CX700 storage systems
Version 3.0.3 or higher
Refer to the EMC Support Matrix and the EMC PowerPath for UNIX Release
Notes on the Powerlink website (http://powerlink.emc.com) for the
specific revision required for your HP-UX version.
Prerequisites
◆ You must have a host that is
• Running an operating system that can support the Navisphere
Manager 6.X browser-based client. For an up-to-date list of
such operating systems, refer to the Navisphere Manager 6.X
release notes on http://powerlink.emc.com.
• On a network that is connected to the storage-system server
and that you will connect to the SPs in
CX300, CX400, CX600,
or FC4700-Series storage systems.
◆ For most configurations, you must also have a host that is
• Running Navisphere CLI version 6.X.
• On a network that is connected to the storage-system server
and that you will connect to SPs in
CX300, CX400, CX600, or
FC4700-Series storage systems.