PowerPath Checklist — Existing Solaris Server and Existing Storage System
5-37
Solaris Installation Checklists
7 FC4500 Storage
System
Set properties for
PowerPath (cont.)
For new HBAs (cont.)
❑
From the computer connected to
the storage system’s serial port,
use the following Navisphere CLI
commands to set the following
default storage-system
properties:
navicli -np -d
device
failovermode 1
navicli -np -d
device
arraycommpath 1
navicli -np -d
device
unitserialnumber lun (
only
for
server in a Sun Cluster; it
must
left at the default setting for all
other cases)
where
device
is the name of the
computer port connected to the
storage-system serial port (for
example, com1).
For new HBAs (cont.)
❑
From the computer connected to
the storage system’s serial port,
use the following Navisphere CLI
commands to set the following
default storage-system
properties:
navicli -np -d
device
failovermode 1
navicli -np -d
device
arraycommpath 1
navicli -np -d
device
unitserialnumber lun (
only
for
server in a Sun Cluster; it
must
left at the default setting for all
other cases)
where
device
is the name of the
computer port connected to the
storage-system serial port (for
example, com1).
Navisphere CLI
reference
Task
With Access Logix Without Access Logix Reference Document