DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-182ATM-EI (Expansion Interface Circuit Pack)
9
t. Error Type 3585, 3586 (Major board alarm): failure of critical components
involved in the operation of the circuit pack, and the switch may no longer
recognize the circuit pack. If the system has a duplicated PNC and the
in-line error received is from an active ATM-EI, the system switches to
standby PNC.
!
CAUTION:
If the system does not have duplicated PNC, services to the EPN
could be disrupted.
Error Type 3585:
Aux Data (Error Type 3585 only):
1. If the board is in a PPN, or if the system has duplicated PNC:
a. Test the ATM-EI (
test board UUCSS l
).
b. If Error 3585 is detected again, or if the board is not
recognized anymore, replace the ATM-EI circuit pack.
2. If the system does
not
have duplicated PNC, and the circuit pack is
in an EPN:
a. Replace the ATM-EI circuit pack.
Error Type 3586: Framer Looparound Test #1260 failed.
Aux Data (Error Code 3586 only):
Aux
Data Description
1 ATM framer failure
2 NCE failed (only from ATM-EIs in EPN)
4 TDM_PLD_FAILED
5 DSP_ALL FAILED
6 Receive Network Processor (RNP) failure
7 Transmit Network Processor (TNP) failure
8 MEMORY read/write failure
Continued on next page
