DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1634TAPE
9
The "service state" field in the Alarm Log refers to the accessibility of the device.
IN (in service) means that users can access the device and all maintenance tests
will run. MTC (maintenance busy) means that the device is "busied out" and
users cannot access it although all demand maintenance tests will run. OUT (out
1025 (i) any Tape Write-Read
(#810)
MINOR OFF test tape a|b
2
long rep 2
1281 (j) any Tape Diagnostics
(#813)
MINOR ON test tape a|b
2
sh rep 2
1537 (k) any Tape Write-Read
(#810)
WARNING OFF test tape a|b
2
long rep 2
1793 (l) any Tape Looparound
(#814)
MINOR OFF test tape a|b
2
sh rep 2
2049 (m) any Tape Looparound
(#814)
MINOR OFF test tape a|b
2
sh rep 2
2305 (n)
2
Tape Frmwr Counters
(#812)
WARNING OFF reset tape a|b
2
2306 (o) 5504 Tape Frmwr Counters
(#812)
WARNING OFF test tape a|b
2
sh rep 2
2561 (p) any Tape Write-Read
(#810)
MINOR OFF test tape a|b
2
long rep 2
2817 (q) any Tape Status (#815) WARNING ON test tape a|b
2
sh rep 2
3073 (r) any In-line MINOR ON test tape a|b
2
long rep 2
3329 (s) any Tape Audit (#811) MINOR OFF test tape a|b
2
long rep 2
3585 (t) 408 MAJOR/
MINOR
OFF
3585 (u) 409 MAJOR/
MINOR
OFF
3841 (v)
3
Miscellaneous MINOR OFF test tape a|b* long rep 1
1. The number of times the tape has been accessed. This number is at least 90% of the manufacturer’s
recommended limit.
2. In a system with a simplex SPE, the carrier does not have to be specified. In a system with duplicated
SPE, the carrier (a or b) must be specified.
3. If error type 1 with aux data of 123 is present, this field will have the out of service cause data. See the
MSS Error Actions
table at the end of the section on TAPE.
Table 9-616. TAPE Error Log Entries — Continued
Error
Type
Aux
Data
1
Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
Continued on next page
