DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-367upgrade software
8
The following display shows a typical result when
upgrade software
DG3v01.02.1.13.0
is entered on a system with duplicated SPE.
If the user presses ENTER, then the command will proceed. If, however, the user
presses the CANCEL key then the command will be terminated.
Output
NOTE:
After initiating an upgrade software, do not touch the keyboard while
waiting for the command to execute. Entering a carriage return will cause
the progress and diagnostic messages to be lost. If the upgrade is
successful, Command successfully completed is
not
displayed.
Instead, the terminal is logged off the system and must be logged in again.
upgrade software DG3v01.02.1.13.0
This upgrade software command will result in the following actions:
From software version: DG3v01.02.1.13.0
To software version: DG3v01.03.4.13.0
Save CURRENT translation to MSS? yes
Press ENTER to continue or CANCEL to abort the command
upgrade software DG3v01.02.1.13.0
This upgrade software command will result in the following actions:
From software version: DG3v01.02.1.13.0
To software version: DG3v01.03.4.13.0
From compatibility index: 2.2
To compatibility index: 2.2
Save CURRENT translation to both active and standby MSS? yes
Attempt to preserve calls across interchange? yes
Press ENTER to continue or CANCEL to abort the command
