DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-335test eda-external-device-alrm
8
The following display shows a typical result when
test duplication-interface
is
entered and A is the active carrier of a duplicated SPE system.
test eda-external-device-alrm
test eda-external-device-alrm all | physical location [repeat number | clear][
schedule]
This test will perform hardware diagnostic tests on an individual
external-device-alarm port or on all external-device-alarm ports.
The
test eda-external-device-alrm
command performs a hardware diagnostic
test on all administered external device alarms if all is entered. If an administered
external device alarm port is entered, the test external-device-alarm command
performs a hardware diagnostic test on that port. The test PASSES if the external
device is not reporting an external device alarm and FAILS if the external device
is reporting an external device alarm. If the technician specifies the port it must
be administered as an external device alarm port on a maintenance board or on
an analog line port carrier board.
Defaults
The default for this command is a repeat of 1.
Test No.
The number of the test being executed.
Result
An indicator as to whether the test failed, passed or was aborted.
Error Code
A numerical description of why the test failed or was aborted.
test duplication-interface
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01B DUPINT 979 PASS
01A DUP-CHL 980 PASS
01A DUP-CHL 874 PASS
01A DUP-CHL 875 PASS
01A DUP-CHL 876 PASS
Command Successfully Completed
