DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1221PGATE-PT (Packet Gateway Port)
9
Packet Gateway Switched Port Loop-Around Test
(#599)
This test is destructive.
This test verifies that the Packet Gateway port can send and receive data on the
TDM bus.
Failure of this test indicates a possible failure of the Packet Gateway circuit pack,
the TDM Bus, or the digital port on the Maintenance/Test circuit pack.
This test aborts when calls are in progress on the port, or if the signaling link the
port is connected to the port. This test also aborts when executed on a port
whose administered speed is other than ‘‘switched.
Packet Gateway Switched Port Loop-Around Test (#599) X D
Level 1 State Query Test (#613) X X ND
Link Status Test (#614) X X ND
Packet Gateway Port Remote Loop-Around Test (#611) X D
(Local Loopback, Digital and Remote Loopbacks)
Session Status Query Test (#976) X X ND
Session Restart Test (#977) X D
1. D = Destructive, ND = Non-destructive
Table 9-486. System Technician-Demanded Tests: PGATE-PT — Continued
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
Continued on next page
