DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-220status attendant
8
The following display shows a typical result when
status administered-conn 3
is
entered. In this example, destination is another switch, and the destination
number consists of a trunk access code (512) and extension (26001).
status attendant
status attendant
console# [print]
The status attendant command displays the operational state of the specified
attendant console. This information can help in trouble diagnosis and in locating
facilities to which the attendant console is connected.
status bri-port
status bri-port UUCSSpp [print]
The status bri-port command displays the service state, maintenance state and
layer 1 state of an ISDN-BRI port. Also displayed on this form is information on
the point-to-point signaling links carried over the port. For more information, see
BRI-PORT in Chapter 9, ‘‘ABRI-PORT (ASAI ISDN-BRI Port)’’
.
Output
An extra section describing how to interpret the results of this command follows
the screen display.
Port The location of the ISDN-BRI port.
Service
State
Whether the ISDN-BRI port is ‘‘in-service’’ or ‘‘out-of-service.’’
Maintenance
Busy?
Whether maintenance testing is currently being performed on the port.
status administered-connection 3 page 1 of 1
ADMINISTERED-CONNECTION STATUS
Connection Number: 3
Enabled? y
Originator: 71001
Destination: 51226001
Connection State: connected
Failure Cause:
Number of Retries:
Auto Restorable? y
