Filter
Top Products
Chapter 3 3-9
Library Operations
Accessing Tapes in the Library
Library Operations
Library Operations
Figure 3-4 Removing/Replacing a Magazine
3. Remove the magazine by lifting it straight up with the handle
(Figure 3-4).
4. To remove a tape, grasp the top and bottom corners of the tape. Pull
the tape straight out of the magazine.
5. To insert a tape into the magazine, ensure that each tape is
positioned as illustrated in Figure 3-5 on page 3-10 or Figure 3-6 on
page 3-11. Push the tape into the slot until it “clicks” into place.
NOTE Ensure you have loaded the correct tape type into the corresponding
magazine. The magazine is labeled according to the drive technology it
supports.