Filter
Top Products
2-34 Chapter 2
Library Installation
Connecting and Powering on the Library (for Models 2/20, 4/40, and
6/60)
9. Connect the remote management card (see “Configuring the Remote
Management Card” on page 4-10).
10.Power on the host.
Figure 2-24 Model 2/20 Fibre Channel Connections
1 Hosts (user configured) 5 SCSI cable from the library controller card to
drive 1
2 Hub or switch 6 SCSI cable from bus 1 on the Fibre Channel
interface card to drive 1
3 Remote management card
LAN connection
7 SCSI cable from bus 2 on the Fibre Channel
interface card to drive 2
4 Appropriate SCSI terminator 8 Fibre Channel cable to hub or switch