Filter
Top Products
Chapter 2 2-51
Library Installation
Moving or Shipping the Library
Library Installation
Library Installation
14.Remove the library from the rack.
• Model 2/20:
With the help of two people or a lift, slide the library out of the
rack and place it in the original packing materials and box.
• Models 4/40 and 6/60:
a. Position the original shipping pallet in front of the rack.
b. With at least one person on each side, slide the library out of
the rack and onto an appropriately rated mechanical lift.
Lower the library onto the shipping pallet.
c. Slide the original box and packing materials over the library.
To re-install the library in a new rack location, refer to “Installing the
Library into a Rack (for Model 2/20, 4/40, and 6/60)” on page 2-9 for the
procedures.
Packing the Library for Shipping (For Model 12/140)
For shipping, place the library in the original packing materials.
Moving a Library
1. If the library is secured to the floor, remove the mounting brackets.
2. Raise the library’s leveler feet.
3. Using at least two people, wheel the library to its new location.
4. Reconnect the library.
5. Lower the leveler feet.