Filter
Top Products
Chapter 2 2-9
Library Installation
Installing the Library into a Rack (for Model 2/20, 4/40, and 6/60)
Library Installation
Library Installation
Installing the Library into a Rack (for Model
2/20, 4/40, and 6/60)
The instructions in this section apply to library Models 2/20, 4/40, and
6/60, mounted in a standard 19-inch rack.
NOTE For stand-alone installations, see “Connecting and Powering on the
Library (for Models 2/20, 4/40, and 6/60)” on page 2-28.
CAUTION Make sure that the rack and all equipment mounted in the rack have a
reliable ground connection.
Verify that the total current of the rack components does not exceed the
current rating of the power distribution unit or outlet receptacles.
WARNING Do not move the library without additional help and/or an
appropriately rated lift device. Model 2/20 weighs 90 pounds
(40.9 kilograms). Model 4/40 weighs 165 pounds (76.4 kilograms).
Model 6/60 weighs 229 pounds (104.1 kilograms).
Tools and Parts
Before you begin, ensure that you have the following:
• Phillips #2 screwdriver
• Torx screwdriver with T25 bit
• 1/2-inch open-end wrench