Filter
Top Products
6-64 Chapter 6
Removing and Replacing Parts
Removing and Replacing the Front Panel Display
4. Remove the two 6-32 screws that connect the display to the chassis
(Figure 6-36).
Figure 6-36 Removing the Front Panel Display
5. Remove the front panel display by sliding it upward, then gently
lifting it away from the front of the library.
6. Disconnect the cable from the back of the display by grasping the
sides of the connector and pulling outward. Place the front panel in
an ESD-protected area.
Replacing the Front Panel Display
1. Connect the display cable to the front panel connector. The display
attaches to two tabs on the side of the display opening. Attach the
display on the tabs and slide it down.
For multi-level libraries, ensure the display cable is not obstructing the
vertical lift transport assembly by attaching it to the inside edge of the
library chassis.