Filter
Top Products
6-72 Chapter 6
Removing and Replacing Parts
Upgrading Firmware
b. Select the drive and [Put Drive Online].
The library will automatically run a self-test when the drive has been
brought online. Wait until the self-test completes, and then scan the
SCSI bus or restart the diagnostics program.
8. Download the firmware to the devices using the diagnostic tool.
9. Power off the library.
NOTE On diagnostic programs that do not flip the drive handle automatically,
you must power cycle the library for the drive firmware download to be
completed.
10.Disconnect the laptop and reconnect to the host system. Be sure to
match the original cabling and termination setup.
11.Power on the library and verify the device can be accessed from the
host.