Filter
Top Products
Chapter 2 2-17
Library Installation
Installing the Library into a Rack (for Model 2/20, 4/40, and 6/60)
Library Installation
Library Installation
WARNING Do not move the library without additional help and/or an
appropriately rated lift device. Model 2/20 weighs 90 pounds
(40.9 kilograms). Model 4/40 weighs 165 pounds (76.4 kilograms).
Model 6/60 weighs 229 pounds (104.1 kilograms).
5. Tighten the screws on the top mounting rail to secure the library.
6. Install the stop bracket to ensure the library is secured inside the
rack, and will not come out past the service position (approximately
2/3 of the library is out of the rack).
• Model 2/20
a. From the back of the library, unscrew the power supply
thumbscrew by hand or with a screwdriver.
b. Install the stop bracket by sliding the edge of the bracket under
the thumbscrew and threading the tab through the latch stop.
c. Tighten the power supply thumbscrew to secure the bracket to
the library.
Figure 2-9 Installing the Stop Bracket for Model 2/20