Filter
Top Products
Chapter 2 2-47
Library Installation
Identifying the Post-Installation Tasks
Library Installation
Library Installation
Identifying the Post-Installation Tasks
After you install and configure the library, you must complete the
following set up tasks from the library’s front panel:
• Setting the date and time: When you first set up the library or if it
has been disconnected for an extended period of time (8 days), set the
library’s real-time clock. See “Setting the Date and Time” on
page 4-27 for more information.
• Setting the mailslot configuration: The default setting is for a
one-slot mailslot. You can select 0, 1, 5, or a 10-slot mailslot. See
“Configuring the Mailslot” on page 4-7 for more information.
• Enabling the password: The library does not have a password
enabled when it arrives. To ensure security, enable and select a
password. See “Enabling and Changing the Password” on page 4-6 for
more information.
• Configuring the library for web monitoring: You can monitor
and manage the library anywhere on the network through user
friendly web pages. See “Configuring the Remote Management Card”
on page 4-10 for more information.
NOTE You must first set a library password through the front panel to
configure the library using the remote management card.