Filter
Top Products
6-68 Chapter 6
Removing and Replacing Parts
Upgrading Firmware
Upgrading Firmware
This section details the processes for upgrading library and drive
firmware. The processes used for upgrading library firmware and drive
firmware are different.
Firmware can be downloaded by:
• Using the remote management card (library only)
• Using a firmware upgrade tape (drive only)
• Using a CE diagnostic tool (drive and library)
NOTE After upgrading firmware, library configuration setting will revert back
to the factory defaults. See Table 4-2 on page 4-5.
Checking the Firmware Revision
NOTE Regardless of whether or not you have the latest firmware, if the library
is in a partial availability state due to a firmware mismatch, new
firmware must be downloaded to resolve the condition.
Check your current firmware revisions by following these steps:
1. Ensure the library is powered on.
2. Use the following menu from the front panel:
3. From the
Firmware Revisions menu, use [More] to view the drive
firmware revisions.
Main Menu ->
Information ->
Firmware Revisions