Filter
Top Products
Chapter 6 6-65
Removing and Replacing Parts
Removing and Replacing the Front Panel Display
Errors and Troubleshooting
Removing/Replacing Parts
2. Install the two long 6-32 T-10 screws that are next to the soft keys to
secure the display to the chassis (see Figure 6-37).
Figure 6-37 Connecting the Front Panel
3. Re-install the display cover by easing the top of the cover underneath
the forehead and sliding it down (see Figure 6-35 on page 6-63).
Tighten the two phillips head 6-32 screws to secure the display cover
in place.
4. Install the viewing window, and tighten the two phillips head screws
to secure the window in place.
5. Install the four screws that connect each chin plate (see Figure 6-35
on page 6-63 for all screw locations).