Filter
Top Products
Chapter 2 2-23
Library Installation
Installing the Library (for Model 12/140 Only)
Library Installation
Library Installation
2. Slowly lower the ramp to the floor, being careful not to let it fall.
3. Remove the four clips that secure the cardboard tube around the
library by pinching the center tabs and pulling them out (Figure 2-15
on page 2-22).
4. Carefully remove the packaging from the library (Figure 2-16):
a. Remove the cardboard cap from the top of the library.
b. Remove the cardboard tube that wraps around the library.
c. Remove the accessory kit from the side of the library.
d. Remove the plastic bag covering the library.
e. Remove the foam cushion from the back of the library.
Figure 2-16 Removing the Packaging