Filter
Top Products
Chapter 3 3-13
Library Operations
Drive and Tape Operations
Library Operations
Library Operations
Drive and Tape Operations
Look at the product information labels on the back of the library or
“Front Panel Overview” on page 3-3 or “Library Back Panel” on page 1-7
for more information about drive and slot numbering.
NOTE The “Home” and “Map” front panel screens illustrate the drive and slot
numbering scheme. Slot numbers displayed in reverse video indicate
those reserved for the mailslot.
Loading a Tape Into a Drive
1. From the Drive and Tape Operations menu, select [Load Tape to Drive].
2. Use the
[-], [+], or [++] key to select any slot. Only full slots are
available for selection.
Select [OK].
3. Use the
[-] or [+] key to select the desired drive. You can only select
empty drives that are compatible with the tape.
4. Select [Load] to move the tape from a slot to a drive.
A confirmation screen indicates the tape is loaded.
Main Menu ->
Service ->
Operations ->
Drive and Tape
Operations