Filter
Top Products
2-4 Chapter 2
Library Installation
Choosing a Location (for Models 2/20, 4/40, and 6/60)
Choosing a Location (for Models 2/20, 4/40, and
6/60)
Choose a location that meets the following criteria.
Table 2-2 Location Criteria
Room temperature 10-35º C (50-95º F)
Power source AC power voltage: 100-127 V or 200-240 V Auto-selecting
Line frequency: 50-60 HZ
LAN connection Locate the library near a LAN connection to connect the remote
management card.
Air quality Minimal sources of particulate contamination. Avoid areas near
frequently used doors and walkways, stacks of supplies that
collect dust, printers, and smoke-filled rooms.
CAUTION: Excessive dust, debris, and particulates can damage
tapes and tape drives.
Humidity 20-80% RH
Adequate clearance Stand-alone configuration:
Back 56 cm (22 inches) for cooling and service.
Front 86 cm (34 inches) for operator access.
Sides 56 cm (22 inches) for removal of the external cover.
Rackmounted configuration:
Back Allow adequate room for service access, at least 61
cm (24 inches).
Front 86 cm (34 inches) for operator access.
Height For ease of use and optimum safety, the top of the
library should be mounted approximately 120 cm
(48 inches) above the floor.