Filter
Top Products
Chapter 6 6-61
Removing and Replacing Parts
Removing and Replacing the Power Distribution Unit (for Model 12/140
only)
Errors and Troubleshooting
Removing/Replacing Parts
Removing and Replacing the Power
Distribution Unit (for Model 12/140 only)
Level of Difficulty: [2] Easy to Medium
The power distribution unit is the black power strip that is located at the
bottom and at the back of the cabinet.
To replace this part:
1. Power off the library.
2. Unplug the power distribution unit from the grounded outlet.
3. Unplug all power cords from the power distribution outlet.
4. Disconnect the ground wire by removing the 10-32 T25 screws that
secures the wire between the power distribution unit and the library
cabinet.
5. Remove the two T-25 10-32 screws and nuts from each side of the
unit. These screws secure the unit to the back of the cabinet.