Filter
Top Products
Chapter 6 6-17
Removing and Replacing Parts
Exploded Views of Replaceable Parts (FRUs)
Errors and Troubleshooting
Removing/Replacing Parts
NOTE Not all the parts listed above are set up as FRUs (Field Replaceable
Units). Some of these components are service parts that are not stocked.
Table 6-7 Unique Parts for Model 12/140 (5 of 5)
Call-
out #
Description
1Top panel.
2 Filler panel. The panel is spring loaded at the top of the library cabinet when
there is space at the top of the cabinet.
3 Side panels. Use a 3/16 Allen wrench to remove the four captive fasteners on
each side panel. See “Accessing the Side Panels for Service” on page 6-35.
4 Library expansion card, which is located only on level 5 of the library (see
page 6-18 for more information).
5 • Front side panels on library: Uses 4-40 screws to attach. See “Accessing the
Side Panels for Service” on page 6-35.
• Back side panels on library: Uses 4-40 screws to attach. See “Accessing the
Side Panels for Service” on page 6-35.
6 Lift cover bottom panel. Two captive T-20 bit screws (one on each side) secure
the panel to the cabinet. See “Accessing the Side Panels for Service” on
page 6-35.
7 Lift assembly with jack and handwheel.
8 Power distribution unit: Uses 10-32 screws to attach. See “Removing and
Replacing the Power Distribution Unit (for Model 12/140 only)” on page 6-61.