Filter
Top Products
2-50 Chapter 2
Library Installation
Moving or Shipping the Library
13.Release the library from the rack.
• For Models 4/40 and 6/60:
Depress the latch stops at the top of the library with a screwdriver
or similar tool (Figure 2-30).
• For Model 2/20:
If the library does not have enough clearance for a tool to be
inserted, unscrew the four screws (two on each side) from the top
(black) mounting rail on the front of the library. Pull the library
partially out, then lower the front half of the library to ease it
under the latch stops.
Figure 2-30 Latch Stops