Filter
Top Products
A-6 Appendix A
Error Code and Qualifier Reference
Library Error Codes
51 33H Test not run, tapes
not in required
locations.
The library needs at least one tape and an
empty slot to perform this test.
52 34H Test not run, an
inventory check is
needed.
• Run the
Inventory Check test.
• Update the backup software to show the
correct tape and slot configuration.
53 35H Failed test, refer to
previous error.
Note the error code qualifier to help
determine appropriate testing (“Interpreting
Error Code Qualifiers” on page A-14).
54 36H Test not run, some
elements are
reserved.
Check the backup software documentation to
disable the reserved condition.
56 38H Cannot run test
with tapes in
current locations.
The library needs at least one tape and an
empty slot to perform this test. For a drive
test, it cannot rewind the media.
57 39H Test not run, not
enough tapes in the
library.
Load one additional tape into the library.
58 3AH Test not started,
the transport
contains a tape.
Run the
Empty Transport test.
59 3BH Failed to put tape
into magazine slot.
Note the error code qualifier to help
determine appropriate testing (“Interpreting
Error Code Qualifiers” on page A-14).
60 3CH Failed to get tape
from magazine slot.
Note the error code qualifier to help
determine appropriate testing (“Interpreting
Error Code Qualifiers” on page A-14).
Table A-1 Error Codes and Recovery Procedures
Decimal
Error
Hex
Error
Description Recovery Method