Filter
Top Products
2-22 Chapter 2
Library Installation
Installing the Library (for Model 12/140 Only)
Installing the Library (for Model 12/140 Only)
Unpacking the Library
Tools
Before unpacking the library, ensure that you have the following tools:
• 7/16 socket wrench
• 9/16 socket wrench
• 1/2-inch open-end wrench
Procedure
1. Remove the vertical banding straps (Figure 2-15).
a. Hold the ramp in place before removing the banding straps, as the
hinged ramp is solely held in place by the straps.
b. Remove the four vertical banding straps that secure the library to
the shipping pallet.
Figure 2-15 Removing the Banding Straps