Filter
Top Products
5-4 Chapter 5
Errors and Troubleshooting
Diagnosing Problems
Using Library LEDs to Diagnose Status
LEDs communicate status and errors as they are occurring. Use the
library LEDs to help determine the state of the library.
All library cards and drive modules contain LEDs. In general, a yellow
LED comes on during power up and changes to green when power up is
successful. This may take a few minutes on some library cards.
The LED bar beneath the front panel display indicates library activity.
Green: Library is ready and idle.
Flashing Green: Library or drive is active.
Amber: Library is partially available and idle (see
page 5-19).
Flashing Amber: Library failed (see page 5-24).