Filter
Top Products
A-10 Appendix A
Error Code and Qualifier Reference
Library Error Codes
105 69H Drive module serial
timeout to drive.
Retry command.
110 6EH Library controller
unable to
communicate with
slave card.
Power cycle the library.
111 6fH Slave controller
card missing or
faulty.
Ensure the slave controller card is installed
and fully seated.
112 70H Slave board
command timeout.
Retry command.
113 71H Slave controller
card failed self test.
Power cycle the library.
114 72H Slave controller
card failed
initialization.
Power cycle the library.
118 76H Slave controller is
on level 1.
Remove slave controller card from the bottom
level of the library.
120 78H Library controller
unable to
communicate with
Fibre Channel card.
Ensure Fibre Channel card is installed and
fully seated.
121 79H Failed to detect all
of the Fibre
Channel cards.
Power cycle the library.
122 7AH Fibre Channel
board command
timeout.
Power cycle the library.
Table A-1 Error Codes and Recovery Procedures
Decimal
Error
Hex
Error
Description Recovery Method