Filter
Top Products
6-32 Chapter 6
Removing and Replacing Parts
Removing and Replacing the Transport Assembly (for Models 2/20, 4/
40, and 6/60 only)
Replacing the Transport Assembly
1. If you are only replacing the transport assembly, remove the vertical
lift assembly from Models 4/40 and 6/60 to install on the replacement
transport assembly. See “Removing the Vertical Lift Assembly” on
page 6-46 for the procedure.
2. For Models 4/40 and 6/60, remove the 6-10 x .5 screws that secure the
guide blocks to the top of the replacement transport assembly to
attach the vertical lift assembly (Figure 6-14).
Figure 6-14 Guide Blocks
3. Connect the umbilical cable (Figure 6-13 on page 6-31). Ensure that it
clicks into place.