Filter
Top Products
Chapter 6 6-41
Removing and Replacing Parts
Removing and Replacing the Transport Assembly (for Model 12/140
only)
Errors and Troubleshooting
Removing/Replacing Parts
5. Go to the front of the library, and pull out the doors on the lowest
module.
6. Behind the doors, loosen the two 10-32 T-25 screws that secure the
retainer bracket on the module to the cabinet.
Figure 6-20 Removing the Retainer Brackets
7. Turn the service handle counter-clockwise to lower the bottom
module. Lower the module all the way down to ensure there is enough
clearance for the vertical lift assembly.
8. Gently pull out the bottom library module.