Filter
Top Products
6-2 Chapter 6
Removing and Replacing Parts
Overview
Overview
NOTE For the purpose of this documentation, we will use the term Model 12/140
to indicate all library models that are five levels and higher. These models
include: 4/100, 6/100, 6/120, and 6/140, 8/140, 10/140, and 12/140.
Most library parts that are used in Model 12/140 are the same as Models
2/20, 4/40, and 6/60. The procedures for replacing these common parts
are documented in this chapter with exceptions noted where applicable
Some parts are unique to Model 12/140. These differences are because of
the library’s increased size and the custom cabinet. Table 6-1 provides an
overview of common and unique parts.
Table 6-1 Common and Unique Parts
Replacement Procedures
Common for all Library
Models
Replacement Procedures
Unique to Library Model
12/140
Front panel display (page 6-63) 12/140 Transport assembly
(page 6-35)
Note: Includes a different
procedure for accessing the
library for service
See page 6-28 for information
on the 2/20, 4/40, 6/60 transport
assembly.
Vertical lift assembly (not used
on Model 2/20) (page 6-46)
Power distribution unit
(page 6-61)
Power supply (page 6-56) Library side panels (page 6-35
and Figure 6-28 on page 6-52)
Fibre Channel, remote
management, slave controller,
and library controller cards
(page 6-18)
Library cabinet (page 6-35)