Filter
Top Products
Chapter 6 6-33
Removing and Replacing Parts
Removing and Replacing the Transport Assembly (for Models 2/20, 4/
40, and 6/60 only)
Errors and Troubleshooting
Removing/Replacing Parts
4. On Model 2/20, lower the transport assembly into the library,
ensuring that the umbilical cable folds properly as you lower the
assembly.
5. On Models 4/40 and 6/60, align the gears on the transport assembly
with the gear rails on the library (Figure 6-15). Check the gear teeth
position to ensure they are aligned with the gear rails and that the
gear rails are level with each other.
CAUTION On Models 4/40 and 6/60, the alignment of the gears with the gear rails is
critical. The library will test alignment when it is powered on.
Figure 6-15 Transport Assembly Position
6. When the transport assembly is level with the top of the library, lower
it to the bottom of the library.
A Gears incorrectly aligned 1 Gears
B Gear correctly aligned 2 Gear rails (racks)
3 Check points to ensure
alignment