Filter
Top Products
User Response: Use the AUDIT LIBRARY command to force the library to
reevaluate its inventory of volumes.
ANR8356E (AS/400)
Incorrect volume mounted volume name was mounted instead of volume expected
volume name in library library name.
Explanation: The incorrect volume was mounted in the designated library. This
error can occur if the library inventory has been altered due to manual intervention
or movement of volumes, or both.
System Action: The volume is dismounted. The expected volume may be marked
unavailable if this error occurs during normal volume mount activity.
User Response: Use the AUDIT LIBRARY command to force the library to
reevaluate its inventory of volumes.
ANR8357I Error reading label of volume from slot-element element address in drive drive
name of library library name.
Explanation: While processing a search-mode CHECKIN LIBVOLUME
command for the designated library, the server finds a volume whose label cannot
be read.
System Action: The volume is dismounted and is not checked into the library.
User Response: Remove the volume from the library and ensure that it is properly
labeled. After doing so, the volume can be checked into the library.
ANR8357E (AS/400)
Error reading label of volume in drive drive name of library library name.
Explanation: While processing a search-mode CHECKIN LIBVOLUME
command for the designated library, the server finds a volume whose label cannot
be read.
System Action: The volume is dismounted and is not checked into the library.
User Response: Remove the volume from the library and ensure that it is properly
labeled. Then check the volume back into the library.
ANR8358E Audit operation is required for library library name.
Explanation: The server encounters a problem managing the given library, and
determines that an AUDIT LIBRARY operation should be performed.
System Action: The server may continue to access the library, but some volumes
may not be accessible until an AUDIT LIBRARY command is issued against the
library.
912
Version 3 Release 7