Filter
Top Products
ANR8301E (AS/400)
Error on library library name: MLD message.
Explanation: An error has occurred while operating on the designated library
device.
System Action: The operation fails.
User Response: Ensure that the MLD parameter associated with the library has
been identified correctly in the DEFINE LIBRARY command, and that the library
device is currently powered on and ready. If the library has an access door, make
sure it is closed. If the problem persists, contact your service representative and
provide the values from this message. The values can be found in Media Library
Device Driver for Application System/400, GC35-0153.
ANR8302E I/O error on drive drive name (OP=internal code, CC=internal code,
KEY=internal code, ASC=internal code, ASCQ=internal code, SENSE=sense data,
Description=error description). Refer to Appendix B in the ’Messages’ manual
for recommended action.
Explanation: An I/O error has occurred while operating on the designated drive.
System Action: The operation fails.
User Response: Ensure that the DEVICE parameter associated with the drive was
identified correctly in the DEFINE DRIVE command, and that the device is
currently powered on and ready. The drive or library reference manual provided
with the device usually contain tables that explain the values of the KEY, ASC, and
ASCQ fields. If the problem persists, contact your service representative and
provide the internal code values and sense data from this message.
ANR8302I (AS/400)
Request number: Mount device type volume volume name mount mode on an
appropriate device in library library name within time limit minutes.
Explanation: The server requires that the specified volume be mounted on an
appropriate device in the designated library. See associated messages for a list of
device names. The value of volume name can be either a specific volume or a
nonspecific volume (scratch). If volume name is SCRATCH, EXPORT.n, or
DUMP.n, you should mount a scratch volume. The value ‘n’ denotes the sequence
number of the scratch volume being requested for DUMP DB or EXPORT
operations.
System Action: The server waits for the volume to be mounted.
User Response: Mount the volume on an appropriate device in the specified
library within the time limit. Use the REPLY command to communicate the device
name to the server.
885
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages