Filter
Top Products
ANR8772I Moving volume volume name (if known) from drive drive name to slot slot
element number in library library name.
Explanation: A volume found in the drive during library initialization is being
moved to the slot.
System Action: The volume is moved from the drive to the slot.
User Response: None.
ANR8773E Incompatible options CHECKLABEL=NO and SEARCH=YES for SCSI
libraries.
Explanation: If a barcode reader is not installed and detected by the server, the
server requires the ability to check the tape label when searching for new volumes
in a SCSI tape library. The CHECKLABEL=NO and SEARCH=YES parameters on
the CHECKIN LIBVOL command are not compatible.
System Action: The command fails.
User Response: Reissue the CHECKIN LIBVOL command and specify
CHECKLABEL=YES.
ANR8774W Volume volume name not checked into library library name but is using category
category number.
Explanation: While processing a DEFINE LIBRARY or AUDIT LIBRARY
command for the given library, the server found a volume that was not checked into
the library (with the CHECKIN LIBVOL command), but is assigned to one of the
categories in use by that library.
System Action: If the volume category equals the value of the library
SCRATCHCAT the category is changed to the value of the library PRIVATECAT.
This is to prevent the library from loading the volume when a scratch volume is
requested.
User Response: If the volume is to be used by the server, it does not have to be
reassigned but it must be checked into the library with the CHECKIN LIBVOL
command. If the volume is not to be used by the server, use the mtlib program to
reassign the volume to its correct category. For details about the mtlib program,
refer to the documentation provided with the library device.
ANR8775I Drive drive name unavailable at library manager.
Explanation: The specified drive availability status at the library manager has
changed from available to unavailable.
988
Version 3 Release 7