Filter
Top Products
System Action: Server operation continues, but the server cannot accept additional
sessions from clients using the IPX/SPX protocol.
User Response: Ensure that IPX/SPX is running properly. This may be done using
the network control panel applet.
ANR8248W (AIX)
Error on allocate listen from APPC LU name LU name, return code return code.
Explanation: The server experiences an error return code from APPC while
attempting to listen for client sessions on the indicated LU name. The return code is
from the APPC allocate listen call.
System Action: Server operation continues. APPC communications is disabled.
User Response: Ensure that APPC is properly configured and activated. Ensure
that APPC can communicate with other nodes through utility programs. Ensure that
the server LU Name is properly configured within APPC.
ANR8248E (AS/400)
Library library not defined in device configuration information file.
Explanation: The specified command requires that the specified library be defined
in the device configuration information file. This definition was not found or the
statements in the file are in the wrong order.
System Action: The command is not processed.
User Response: Refresh your device configuration information file by issuing the
BACKUP DEVCONFIG command. Make sure a library is defined for the device
class. Reissue the command.
ANR8248W (Windows NT)
IPX/SPX driver is terminating due to error in creating a new thread.
Explanation: The server cannot initialize due its inability to create a new thread of
execution.
System Action: Server operation continues, but IPX/SPX communications is
inoperative.
User Response: The most likely cause is a lack of memory. Ensure that there is
sufficient space for the Windows NT paging file. Click on the system icon in the
Windows NT control panel and then click on the virtual memory button. Refer to
the on-line help for instructions on how to increase the amount of virtual memory.
You may also wish to cut down on the maximum number of sessions that the server
can accept with the MAXSESSIONS option in the server options file.
844
Version 3 Release 7