Tivoli Audio Version 3 Release 7 Portable Media Storage User Manual


  Open as PDF
of 1473
 
ANR8817E Name length for volume Volume name invalid; max is Maximum name length.
Explanation: During LABEL LIBVOL processing, the volume name provided to
be written on the label exceeds the maximum length for the type of cartridge.
System Action: The label process fails for that cartridge.
User Response: Reissue the LABEL LIBVOL command and provide a volume
name that is not longer than the maximum listed.
ANR8818E I/O Error on library library name; request for op. operation/function to the 3494
Library Manager has timed out.
Explanation: A command for the operation was issued to the Library Manager and
a response was not received within the maximum timeout period.
System Action: The operation and the transaction fails.
User Response: Verify that communications with the library is operational, that it
is online and ready for commands. Increase the time-out limit of the Library
Manager Control Point device driver. If the problem persists, provide your service
representative with the 3494 Library Manager transaction logs.
ANR8819E No barcode reader detected in library library name.
Explanation: A LABEL command was issued with the
LABELSOURCE=BARCODE option. The library was unable to detect that the
cartridges had valid barcode labels or the library did not have a barcode reader. If a
barcode reader is present the reader might be disabled or it is unable to read the
labels.
System Action: Examine the cartridges to ensure they have barcode labels and
they are compatible with the barcode reader. Not all vendors’ labels are readable by
all libraries. Check that the barcode reader is configured and functioning properly.
User Response: None.
ANR8820W Repairing VCR data for Volume volume name in drive drive name; dismount
may be delayed.
Explanation: The Vital Cartridge Records of the cartridge in the drive are lost or
corrupted, which results in the inability of the drive to do fast locates to file
positions on the cartridge. The VCR is being rebuilt during the volume dismount
process in order to avoid performance degradation on future mounts of the volume.
System Action: The server continues the dismount operation. There may be a long
delay because the VCR is rebuilt by spacing the tape forward to the end-of-data.
User Response: None.
1000
Version 3 Release 7