Filter
Top Products
ENABLE TCPINFO TRACE BEGIN tcptrace.out After a session starts and gets
message ANR8222W, issue the following commands: TRACE FLUSH TRACE
END This will create trace data in file tcptrace.out and will terminate the trace. This
file should be supplied to your service representative on request.
ANR8223W (AIX)
Unable to connect to remote system RemoteSystem due to unexpected return
code ReturnCode
Explanation: The server was unable to connect to a remote system due to an
unexpected return code from the connect Application Programming Interface.
Common return code are handled with specific messages. This return code was
unexpected.
System Action: Server operation continues but the connection to the remote
system fails.
User Response: TCP/IP return code are listed in file /usr/include/sys/errno.h and
may provide a pointer to the underlying problem. /usr/include/sys/errno.h is part of
fileset bos.adt.include.
ANR8223I (AS/400)
IPX available at address server address and port port number.
Explanation: The ADSM server can accept sessions with clients using the IPX
communication protocol on the indicated port number and specified server address.
System Action: Server operation continues.
User Response: None.
ANR8223W (Solaris)
TCP/IP driver is unable to accept a new session with client at address TCP/IP
address due to an error in creating a new thread.
Explanation: The server cannot accept a client session with the client at the
indicated address due to an inability to create a new thread.
System Action: Server operation continues, the session request fails.
User Response: The most likely cause is lack of memory. Ensure that sufficient
paging space is available for Solaris. You may also use ps -ef to determine if the
number of applications is causing a memory shortage. You may also decrease the
maximum number of sessions that the server can accept with the MAXSESSIONS
option in the server options file.
827
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages