Filter
Top Products
Completion Code Values Common to All Device
Classes
The following table shows the completion code values, in decimal
and hexadecimal numbers, common to all device classes. It provides
a description for the I/O error message and the recommended action.
After performing the recommended action, retry the failing
operation. If the failing operation is not successful, contact TSM
support.
Table 2. Completion Code Values Common to All Device Classes
Decimal Hexadecimal Description Recommended Action
200 X'C8' The device indicated a failure
condition, but sense data was
unavailable.
Retry the failing operation.
201 X'C9' Device driver failure Contact TSM support.
202 X'CA' The device EEPROM failed. The device should be tested or
serviced.
203 X'CB' Manual intervention required Correct the problem on the device.
This may be a stuck tape, dirty
heads or a jammed library arm.
204 X'CC' Recovered from an I/O error; for
your information only
No action necessary
205 X'CD' SCSI adapter failure Check for loose cables, bent pins,
bad cables, bad SCSI adaptors,
improper termination or bad
terminators.
206 X'CE' General SCSI failure Check for loose cables, bent pins,
bad cables, bad SCSI adaptors,
improper termination or bad
terminators.
207 X'CF' Device is not in a state capable of
performing request
Ensure the device is on and ready.
Ensure the DEFINE DRIVE and
DEFINE DEVCLASS have been
issued properly.
208 X'D0' Command aborted Contact TSM support.
1393
Tivoli Storage Manager Messages
C. I/O Error Code
Descriptions