Filter
Top Products
ANR8222W (AIX)
TCP/IP driver is unable to set the window size to TCPWindowsize for the server
master socket. The default value will be used.
Explanation: The server cannot set the window size for the socket on which the
server listens to the requested size shown. The server uses the default window size
for listening for sessions. There may be a lack of memory for TCP/IP buffers.
System Action: Server operation continues with the default window size.
User Response: Restart the server with a smaller window size in the options file if
necessary. Issue the QUERY OPTION command to determine the setting of the
server TCPWindowsize.
ANR8222W (AS/400)
Failure reason is given in spool file QSYSPRT.
Explanation: The ADSM server cannot communicate by way of TCP/IP. TCP/IP is
not activated.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IP communication protocol.
User Response: A spool file QSYSPRT provides the reason.
ANR8222W (Solaris)
Unable to establish TCP connection - server HALT in progress.
Explanation: The server cannot accept a client session due to server HALT
processing that is in progress.
System Action: Server operation continues, but the session request for this session
fails.
User Response: None.
ANR8222W (Windows NT)
TCP/IP driver is unable to use the TCP/IP NODELAY option for client client.
Explanation: The server cannot set TCP/IP NODELAY for the indicated client.
The session proceeds with TCP/IP Delay processing in effect. This causes TCP/IP to
buffer data prior to sending it to clients.
System Action: Server operation continues and the session continues with the
delay processing on.
User Response: Further details for use in contacting your service representative
can be obtained by issuing the following trace commands from an admin session or
from the server console (proper administrative authority is required): TRACE
826
Version 3 Release 7